1. Home
  2. Light - UV Cannon
Loading...
SKU
light-uv-cannon

Light - UV Cannon

$75.00
Hi powered ultraviolet wash light available for rent. The UV Cannon can wash a large space and has multiple functions including DMX, strobe, and pulse.
Add to Compare
Email
  • Super high output UV light cannon
  • Great for performance stages, theatrical productions and special effects productions
  • Requires almost no maintenance ? low heat, low power consumption
  • Advanced COB Technology (Chip On Board) produces powerful, smooth UV color
  • 3 Operation modes: Sound Active, Manual, & DMX
  • 3 DMX Channel modes: 1, 2 or 3 channel
  • 4-button digital DMX display
  • Flicker Free operation (No flickering on camera)
  • 5 selectable Dim Curves (Standard, Stage, TV, Architectural & Theatre)
  • LED pulse and strobe effect
  • Electronic Dimming: 0 - 100%
  • Beam angle: 33 degrees
  • Dual yoke allows fixture to be hung or set on the ground
  • DMX Linkable: 3-pin XLR data connectors
  • Power Draw: 120W total (All LED's @ Full)
  • Light Source: 100W COB (Chip On Board) UV LED engine
  • Multi-voltage Operation: Auto switching, AC 100V - 240V/50Hz -60Hz
  • Dimensions (LxWxH): 12.75? x 11? x 8?/ 320 x 278 x 200mm
  • Weight: 11 lbs. / 4.98kgs 
  • Wavelength: 395-405nm

UV Cannon black light.

There are 2 modes that are most popular with the UV cannon.

UV dimmer mode-Adjust the intensity of the UV output. You can also apply a strobe effect in this mode.

Sound-Active mode- The unit will react to sound following built in programs.

UV MANUAL DIMMER MODE:

This mode is typically used to get the full effect of the UV light. The light will stay illuminated while being able to adjust the intensity of the light. This mode can be used with a strobe effect if desired.

  1. Point light away from you and plug unit in.

  2. Locate “MODE” button below LED read out screen

  3. Push “MODE” button till xxx4 is displayed, i.e. 2004

  4. Press the up or down button to adjust intensity.

TO SET STROBE MODE:

  1. Press the “MODE” button

  2. Push button till xxx5 is displayed, i.e. 1005

  3. Press up or down button till desired effect is reached. 0005 will turn the strobe effect off.

SOUND ACTIVE MODE:

In this mode the UV cannon will react to sound

  1. Plug the fixture in while light is facing away from you.

  2. Press the “MODE” button till 0017 is displayed. This fixture will now change to sound.